Skip Navigation.

Sloan Implement

217-226-4411

John Deere DH55 Series Offset Disks

Disks

Your Preferred Location

Adjustable disk blade scrapers
Oil bath tapered roller bearings minimize maintenance
Working widths from 10-ft. to 13.75-ft.

Adjustable disk blade scrapers
Oil bath tapered roller bearings minimize maintenance
Working widths from 10-ft. to 13.75-ft.

Features

PTO HP: 200+ hp (149.1+ kW)
Hitch: Cast link
Working Width: 10 ft. (3.0 m)

Specifications

Available blade sizes - Blade option one:	813x12.7 mm 32x0.5 in.
Disk blades - Quantity:	20
Disk blades - Spacing:	35.6 cm 14 in.
Disk blades - Type:	Notched (front) Notched (rear) Standard
Disk gangs - Axle material:	Round heat treated alloy steel threaded on both ends
Disk gangs - Axle size:	6.4 cm 2.5 in.
Disk gangs - Bearing standards:	Welded, Reinforced
Disk gangs - Bearing type:	Oil bath tapered roller
Disk gangs - Bearing wear plates:	Standard
Disk gangs - Front angle:	3 positions
Disk gangs - Rear angle:	3 positions
Disk gangs - Scrapers:	Adjustable
Frame - Duty:	Heavy
Frame - Tube size:	20.3x20.3x1.3 cm 8x8x0.5 in.
Frame - Type:	Single offset rigid
Hitch - Front hitch type:	Pintle
Lighting and safety - Lights:	Yes
Lighting and safety - Markings:	SMV
Lighting and safety - Safety tow chain:	Yes
Set-up time - Labor hours:	2-3 for two people
Tires - Size:	385/65R22.5
Tires - Type:	2 - Radial industrial
Tires - Wheel hub type:	5-Spoke dayton hubs
Tractor requirements - Recommended drawbar hp range:	167.8 kW 225+ hp
Transport - Wheel hub bearings:	Dual tapered roller bearings
Transport - Width:	3.7 m 12 ft
Warranty - Time period:	1 year
Weight - Net:	5443.1 kg 12000 lb
Weight - Weight per disk blade:	272.2 kg 600 lb
Working - Approximate working width:	3.4 m 11 ft

Two separate control arms create consistent performance

Control arms level in ground and during transport

Easy to set for desired soil condition

Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.

Oil bath tapered roller bearings minimize maintenance

Minimal maintenance increases work hours

Sealed with industrial-grade seals

Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.

Transport locks secure disk wings

Transport locks secure disk wings cylinder

Transport locks are standard, ensuring disk wings are in secure transport mode.

End washers and wrenches keep gang shaft end nut tight

Keeping gangs tightened increases wear life

Gang nut wrenches are always there when needed

End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life.

Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.

Adjustable disk blade scrapers increase productivity

Scrapers clean disk blades

Scrapers work great in wet and sticky soils

Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.

Features
Features
- PTO HP: 200+ hp (149.1+ kW)
- Hitch: Cast link
- Working Width: 10 ft. (3.0 m)

Specifications

Available blade sizes - Blade option one:	813x12.7 mm 32x0.5 in.
Disk blades - Quantity:	20
Disk blades - Spacing:	35.6 cm 14 in.
Disk blades - Type:	Notched (front) Notched (rear) Standard
Disk gangs - Axle material:	Round heat treated alloy steel threaded on both ends
Disk gangs - Axle size:	6.4 cm 2.5 in.
Disk gangs - Bearing standards:	Welded, Reinforced
Disk gangs - Bearing type:	Oil bath tapered roller
Disk gangs - Bearing wear plates:	Standard
Disk gangs - Front angle:	3 positions
Disk gangs - Rear angle:	3 positions
Disk gangs - Scrapers:	Adjustable
Frame - Duty:	Heavy
Frame - Tube size:	20.3x20.3x1.3 cm 8x8x0.5 in.
Frame - Type:	Single offset rigid
Hitch - Front hitch type:	Pintle
Lighting and safety - Lights:	Yes
Lighting and safety - Markings:	SMV
Lighting and safety - Safety tow chain:	Yes
Set-up time - Labor hours:	2-3 for two people
Tires - Size:	385/65R22.5
Tires - Type:	2 - Radial industrial
Tires - Wheel hub type:	5-Spoke dayton hubs
Tractor requirements - Recommended drawbar hp range:	167.8 kW 225+ hp
Transport - Wheel hub bearings:	Dual tapered roller bearings
Transport - Width:	3.7 m 12 ft
Warranty - Time period:	1 year
Weight - Net:	5443.1 kg 12000 lb
Weight - Weight per disk blade:	272.2 kg 600 lb
Working - Approximate working width:	3.4 m 11 ft

Details

Two separate control arms create consistent performance

Control arms level in ground and during transport

Easy to set for desired soil condition

Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.

Oil bath tapered roller bearings minimize maintenance

Minimal maintenance increases work hours

Sealed with industrial-grade seals

Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.

Transport locks secure disk wings

Transport locks secure disk wings cylinder

Transport locks are standard, ensuring disk wings are in secure transport mode.

End washers and wrenches keep gang shaft end nut tight

Keeping gangs tightened increases wear life

Gang nut wrenches are always there when needed

End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life.

Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.

Adjustable disk blade scrapers increase productivity

Scrapers clean disk blades

Scrapers work great in wet and sticky soils

Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.

Other Disks Models

Request A Quote

First Name *

Last Name *

Phone Number *

Email *

Company

Zip Code *

Location *

Equipment Category

Specific Model

Comments

Contact

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location *

Comments

Request a Part

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location *

Model *

Stock Number of Part

Comments

Consignment

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State/Province

Zip Code *

Country

Product *

Serial Number of Equipment

Hours On Equipment

Comments

Request a Service

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location *

Type Of Equipment

Model Number

Description of Problem

Request A Rental

First Name *

Last Name *

Phone Number *

Email *

Company

Address

City

State

Zip Code*

Equipment Category

Specific Model

Comments

Simple Contact Form

First Name *

Last Name *

Please provide either a phone number OR an email

Phone Number *

Email *

Comments

Submit Application

First Name*

Last Name*

Email Address*

Phone Number*

Street

City

State

Zip Code*

Optional Message

Upload your resume

First Name *

Last Name *

Phone Number *

Email Address *

Location *

Year *

Make *

Model *

Hours

Serial Number

Rate the Quality/Condition of Your Machine

Additional Specs/Description

New Purchase

Change Your Preferred Location

Assumption, IL

Select Location

Atwood, IL

Select Location

Bloomington, WI

Select Location

Carlinville, IL

Select Location

Cuba City, WI

Select Location

Effingham, IL

Select Location

Emily test

Select Location

Fulton, IL

Select Location

Hamel, IL

Select Location

Havana, IL

Select Location

Lanark, IL

Select Location

Litchfield, IL

Select Location

Monroe, WI

Select Location

Montfort, WI

Select Location

Mt. Horeb, WI

Select Location

Perry, IL

Select Location

Petersburg, IL

Select Location

Shelbyville, IL

Select Location

Taylorville, IL

Select Location

Vandalia, IL

Select Location

Virden, IL

Select Location

White Hall, IL

Select Location

Winchester, IL

Select Location

Sloan Implement

217-226-4411

John Deere DH55 Series Offset Disks

Disks

Your Preferred Location

Features

Specifications

Available blade sizes - Blade option one:

Disk blades - Quantity:

Disk blades - Spacing:

Disk blades - Type:

Disk gangs - Axle material:

Disk gangs - Axle size:

Disk gangs - Bearing standards:

Disk gangs - Bearing type:

Disk gangs - Bearing wear plates:

Disk gangs - Front angle:

Disk gangs - Rear angle:

Disk gangs - Scrapers:

Frame - Duty:

Frame - Tube size:

Frame - Type:

Hitch - Front hitch type:

Lighting and safety - Lights:

Lighting and safety - Markings:

Lighting and safety - Safety tow chain:

Set-up time - Labor hours:

Tires - Size:

Tires - Type:

Tires - Wheel hub type:

Tractor requirements - Recommended drawbar hp range:

Transport - Wheel hub bearings:

Transport - Width:

Warranty - Time period:

Weight - Net:

Weight - Weight per disk blade:

Working - Approximate working width:

Two separate control arms create consistent performance

Oil bath tapered roller bearings minimize maintenance

Transport locks secure disk wings

End washers and wrenches keep gang shaft end nut tight

Adjustable disk blade scrapers increase productivity

Features

Specifications

Available blade sizes - Blade option one:

Disk blades - Quantity:

Disk blades - Spacing:

Disk blades - Type:

Disk gangs - Axle material:

Disk gangs - Axle size:

Disk gangs - Bearing standards:

Disk gangs - Bearing type:

Disk gangs - Bearing wear plates:

Disk gangs - Front angle:

Disk gangs - Rear angle:

Disk gangs - Scrapers:

Frame - Duty:

Frame - Tube size:

Frame - Type:

Hitch - Front hitch type:

Lighting and safety - Lights:

Lighting and safety - Markings:

Lighting and safety - Safety tow chain:

Set-up time - Labor hours:

Tires - Size:

Tires - Type:

Tires - Wheel hub type:

Tractor requirements - Recommended drawbar hp range:

Transport - Wheel hub bearings:

Transport - Width:

Warranty - Time period:

Weight - Net:

Weight - Weight per disk blade:

Working - Approximate working width:

Two separate control arms create consistent performance

Oil bath tapered roller bearings minimize maintenance

Transport locks secure disk wings

End washers and wrenches keep gang shaft end nut tight

Adjustable disk blade scrapers increase productivity

Other Disks Models